How to Line a Fishing Pole in 10 Easy Steps

Daiwa Seahunter X-Variotip TeleSHRXT150G

Fishing can be a fun and rewarding activity, but it’s important to have the right gear before you hit the water. One of the most important pieces of equipment is your fishing pole. If it’s not properly lined, you won’t be able to cast the line accurately and you’ll definitely lose some fish.

Lining a fishing pole may seem like a daunting task, but it’s actually quite simple. In just 10 easy steps, we’ll show you how to do it. So gather your supplies and follow along!

Why You Need to Line Your Fishing Pole

You need to line your fishing pole because it ensures a smooth, consistent release of the line as you cast. If you don’t line your fishing pole, you’ll end up with kinks and knots in your line, which will seriously impair your casting ability.

Not to mention, a tangled mess of line is just a hassle to deal with on the water. So take the time to do it right—it’ll make your fishing experience a lot more enjoyable.

What Kind of Line to Use

Now that you have your fishing pole, it’s time to choose the line. There are a few things you need to keep in mind:

The type of line you use will depend on what kind of fish you’re trying to catch. For example, if you’re targeting trout, use a light line. If you’re after salmon, use a heavier line.

You also need to think about the size of the fish you’re going for. A light line is perfect for smaller fish, while a heavier line can handle bigger fish.

Finally, make sure to match the strength of the reel with the strength of the line. If your reel isn’t strong enough to handle the fish, it’s going to break the line.

How to Spool Your Line

Now that you know how to tie a fishing line, it’s time to learn how to spool it onto your fishing pole. This is actually a lot easier than it sounds.

Here are the 10 easy steps:

  • Cut your line to the desired length and tie a knot at one end.
  • Tie a second knot close to the first one. This will create a loop.
  • Slide the loop over the tip of the fishing pole.
  • Feed the line through the guides on the pole.
  • Coil the line around the tip of the pole until you have about 12 inches of line left.
  • Tie a knot in the end of the line to keep it from unraveling.
  • Clip on your lure, bait or hook and you’re ready to go fishing!

How to Tie the Line to Your Reel

Now it’s time to attach the line to your reel. First, cut a length of line that’s about two feet longer than the distance from the reel to your rod tip. Thread one end of the line through the hole in the reel, and then make a loop with the tag end. Now put your thumb and forefinger on each side of the loop and pull tight.

How to Attach the Line to Your Lure

Now it’s time to attach the line to your lure. This step is crucial, as it can make the difference between a successful catch and an empty stomach.

Here’s how to do it: take the end of the line and thread it through the eye of the lure. Now, pinch the line between your thumb and first finger and hold it tight. Use your other hand to twist the lure a few times. This will create a loop in the line.

Take the loop and put it over the top of the hook on your lure. Now, pull both ends of the line tight until the loop disappears. You’ve now attached your line to your lure!

How to Cast Your Line

It’s time to cast your line. Here’s how:

  • Hold the fishing pole in your dominant hand and make sure the reel is in the palm of your hand.
  • With your thumb, press down on the spool to release enough line for the cast.
  • Hold the line between your index finger and thumb, and make sure the loop is big enough to fit over the casting arm of the reel.
  • Point the rod at your target and release the line from your hand while quickly flicking your wrist.
  • The line will travel along the rod and over the top of the reel, and then it will fall toward your target.
  • As soon as the line hits the water, quickly pull it back in and re-cast.
  • Repeat this process until you’ve caught your fish!

How to Set the Hook

When you see a fish biting, you need to set the hook as fast as you can. You do this by quickly pulling the rod back in a jerking motion. Don’t worry, you’ll get the hang of it with a little practice.

The key is to keep your eye on the fish and wait for it to start swimming away before you set the hook. If you set the hook too early, you’ll end up losing the fish.

How to Reel in Your Fish

downrigger for saltwater

Now that you’ve got your line in the water, it’s time to reel in that fish. Here are a few tips on how to do it:

  • Keep the rod at a 45-degree angle to the water.
  • Use your hand to guide the fish towards the net or landing net, if you have one.
  • When the fish is close to the net, use your thumb and forefinger to pinch the net open and scoop the fish up.
  • If you’re using a barbless hook, gently remove the hook from the fish’s mouth and release it back into the water.
  • If you’re using a barbed hook, use pliers or wire cutters to remove the hook. Be careful not to damage the fish’s mouth in the process.
  • Gently hold the fish in one hand and use your other hand to remove the hook from its body.
  • If you’re using a release grip, hold on to the fish until it swims away on its own.
  • If you’re using a landing grip, hold on to the fish until you can get it into a cooler or onto dry land.
  • Make sure you keep your hands wet when holding onto the fish, so it doesn’t slip out of your grip.
  • Once you’ve landed your fish, take a picture for posterity and then release it back into the water

How to Remove the Fish From the Line

Now that you know how to tie a fishing line to your pole, it’s time to learn how to remove the fish from the line. Here are 10 easy steps to make it happen:

  • Hold the fish by its tail and gently lower it into the water.
  • Gently twist the fish’s head and body until it separates from the line.
  • If the hook is still embedded in the fish’s flesh, use needle-nosed pliers to remove it.
  • Hold the fish under cold running water until all the blood is gone.
  • Cut off the head and guts and throw them away.
  • Rinse the fish in cold water and place in a zipper-lock bag.
  • Add ice, seal the bag, and place in a cool place until you’re ready to eat it.
  • To cook, place the fish in a baking dish with a little water and bake at 350 degrees F for about 15 minutes, or until done.
  • Remove the skin before serving.
  • Enjoy!

How to Clean Your Gear

After a long day of fishing, it’s important to clean your gear properly so it’s ready for your next outing. Here are 10 easy steps to cleaning your fishing pole:

  • Start by removing the line and reel from the pole.
  • Next, use a brush to clean the guide eyes and the top and bottom of the pole.
  • Apply a gentle stream of water to rinse the pole clean.
  • Soak a cloth in oil and wipe down the entire pole.
  • Let the pole air dry completely before putting the line and reel back on.
  • Re-spool the line onto the reel using the same technique you used when you first put it on.
  • Finally, take a moment to admire your handiwork—you’re now a pro at lining a fishing pole!



Fishing is a fun and relaxing activity, and it’s even more fun when you catch a fish. Follow these 10 easy steps to line your fishing pole, and you’ll be on your way to a great day fishing.

Pick the right pole for the type of fish you’re going to be targeting.

  • Measure out the correct amount of line for your pole.
  • Secure the line to the reel.
  • Attach a weight to the end of your line.
  • Tie on your bait.
  • Cast your line into the water.
  • Wait for a fish to bite.
  • Reel in your fish.
  • Enjoy your delicious catch!

Leave a Reply

Your email address will not be published. Required fields are marked *