High pressure walleye ice fishing takes place on lakes with a strong current and good depth structure. A minimum of 50 pounds per square inch (PSI) is ideal. These conditions make catching walleyes challenging because they tend to stay deep rather than close to shore where anglers cast their lures. Fish the shallower waters first, and then move deeper on each trip if no strikes occur.
Bigger bait works best. Larger walleyes prefer live shad over artificial lures. Shad use larger hooks than white bass. Walleye rods should have heavy action.
Fast boats provide a smoother ride and allow anglers to work the edges of the lake more effectively. They’re not necessary for walleyes, however.
Hot weather tends to keep walleyes shallow. If this occurs, you’ll need to get closer to shore.
Heavy lures are effective at catching walleyes because they present a greater profile than smaller models. You can catch them in a variety of ways including trolling, jigging, and spooking.
Walleyes are attracted to warmer surface temperatures. Fish early in the morning or late in the evening to take advantage of these conditions.
Is ice fishing better with high or low pressure?
Ice fishing is a sport enjoyed across North America. Ice fishermen use various equipment to attempt to catch fish in frozen lakes, ponds, rivers and streams. One piece of equipment often used includes a line attached to a reel that drags behind a boat. The fisherman then uses a lure, commonly referred to as a jig, to attract fish near the surface of the water.
Once the fish bite the hook, they become hooked and the fisherman pulls them onto the ice using a rod and reel.
Another type of device used is called a spinner rig. Spinning rigs consist of a spinning bobbin that attracts fish. After the fish bites the bait, it becomes hooked and the fisherman pulls it onto the ice. Both methods are effective at catching fish.
However, some feel the best method is to use a low-pressure ice auger. Low-pressure ice augers have a unique design compared to traditional ice augers.
Traditional ice augers work by rotating cutters that create channels in the ice. These channels allow cold air to circulate underneath the ice which helps prevent melting. Cold air circulates beneath the ice in order to keep the temperature below freezing point. By contrast, a low-pressure auger rotates in only one direction and creates vertical ridges, rather than horizontal ones, in the ice. This makes the ice much stronger and prevents the ice from breaking up.
According to icefishingmagazine.com, “Low-pressure ice augering is preferred over traditional augering due to its strength and durability. Unlike traditional ice auguring, no cutting blades need to be rotated to create holes in the ice. Instead, these augers simply rotate a shaft with a spiral blade attached.”
The website goes on to say that “Auger shanks should be carefully selected to optimize performance. For instance, the depth of the hole should match the thickness of the ice. A shallow hole reduces the effectiveness of the drill bit and may cause early failure.
Conversely, if the hole is too deep, the blade will not penetrate the bottom of the hole causing loss of efficiency.”
Another benefit to using low-pressure ice augers is that the holes created by the auger do not freeze out quickly. If the holes are filled back in before freezing occurs, the ice auger can be reused several times (up to 100) without replacing the auger shank.
A low-pressure ice auging machine is a specialized tool designed to operate under low-pressure conditions. Low-pressure ice fishing devices feature a special motor that can spin at speeds up to 1,500 revolutions per minute. In addition, the machine features a powerful vibrating mechanism that helps break loose any obstructions in the ice. When the ice breaks up, it allows the operator to dig out small pieces of debris and avoid damaging the machine.
There are two types of low-pressure ice augering machines: electric and gas powered. Electric units are lighter and easier to transport than their gas counterparts. Gas units tend to be heavier and require longer hours of operation to produce the same amount of torque. Because gas motors require fuel to run, they generate carbon monoxide fumes. The exhaust fumes are harmful to humans and animals and must be properly vented away from both people and pets.
In terms of size, electric units range between 2.5 inches and 6 feet long. Gas models can be as long as 14 inches and weigh up to 25 pounds. As mentioned earlier, low-pressure ice augerers have a single-bladed cutter that runs along the length of the unit.
Mount the auger on a cylindrical base that contains an internal gearbox. An electric motor is inside the base and drives the gears that turn the auger. The auger is connected to the output shaft via a universal joint.
Electric and gas models feature different levels of torque and speed settings. Depending on the model, the speed ranges from 500 rpms to 1,500 rpm and the torque ranges from 0.8 inch pound-feet to 10.0 inch pound-feet. Most manufacturers recommend starting off slow and increasing the speed while drilling.
Many models also offer a reverse setting. Low-pressure ice augerer users who wish to perform more detailed inspections of the ice should consider purchasing a separate auger probe attachment.
When choosing low-pressure ice augery, it is important to look for the following features:
- Heavy duty construction
- High torque motor
- Easy-to-use controls
- Good visibility
- Automatic shut-off after three minutes
high pressure vs low pressure ice fishing
High-pressure ice fishing is the best method to use if you want to catch big fish. When using high-pressure ice fishing, you’re going to have a greater chance of catching a larger fish than when using lower-pressure options. High-pressure ice fishing is for anglers who are looking to catch a big fish.
There’s no way around it – if you want to get the biggest fish possible, you need to use high-pressure ice fishing.
Low-pressure ice fishing may work for smaller fish, but it won’t yield the same amount of fish as high-pressure methods. If you’re looking to catch small fish, then low-pressure ice fishing is a good option. But don’t expect to land much fish when using low-pressure ice fishing. You’ll do better if you’re targeting bigger fish.
Do walleye like high pressure or low pressure?
I’m not sure anyone have ask this question, but it’s something we need to address while researching our new book! We started out thinking high-pressure was better for fish, then realized there wasn’t enough research to support this, especially since walleyes don’t generally live long lives. (Most species have a maximum lifespan of two years.) So now, we’re sticking to a combination of low- and high-pressure systems at various times throughout their life cycle.
High Pressure vs. Low Pressure for walleye?
Walleye prefer low pressures, especially those under 500 psi. If you have a pressure gauge on your water line, use the lowest level of pressure that makes your water flow freely without causing problems. When using a pump, make sure that the pump doesn’t run at the highest setting. Also, if the pump isn’t working properly, take it out, clean it and try again.
How do you catch big walleye in ice fishing?
You use bait
When ice fishing, you’re baiting your hook with food. Bait is something that lures fish in. Fish are attracted to many different things – including visual stimuli, chemical stimuli, and even sounds. When you’re ice fishing, you need to make sure you have a bait that attracts fish!
You use depth finders
Ice fishing involves dropping a line down through layers of ice to reach deep water where fish live. Depth finders help you determine how thick the ice is and whether or not the fish are close to the surface. If they aren’t close to the surface, then you know you need to drop deeper to get them.
You use jigs
Jigs are baits that look like worms. Jigs cause fish to think you’re trying to eat them. The shape of jigs makes them move slowly through the water and act like prey.
You use a lure
Lures attract fish without actually eating them. Lures create movement in the water and imitate whatever fish would want to bite at. Most often, these lures mimic smaller organisms in the water, offering up their scent to fish. Lures can be either natural or artificial, and range from spoons to crankbaits to plugs.
You use flies
Flies are small, lightweight insects that fish eat. Flies usually have hooks attached so that you can attach your line to them. As the fly moves through the water, it looks just like what fish eat.
You use night time
Nighttime ice fishing is similar to daytime fishing in some ways. However, since the sun doesn’t shine down as brightly as daylight, fish don’t see the light reflecting off your rod and reel nearly as well. So, if you want to catch more fish, try to set up your gear before sunset.
You use a hole saw
A hole saw is a great tool for breaking holes in the ice. A hole saw cuts into the top layer of ice, creating a hole to allow access to the water below. Once you’ve cut the hole, you can use a rope and pulley system to lower yourself and your gear down into the water.