What do you do with broken fishing rods? I have several fishing rods that I’ve picked up over the years, either at flea markets or garage sales. While some would say they’re junk, I love them – they’re well-used, sturdy and durable. All of my rods were originally intended for fly fishing, so they already had a lot going for them. I decided to make something out of these old beauties!
Fishing rods break and need to be fixed. A broken fishing rod may be damaged at its tip, handle or anywhere along its length. Fishing rods can be repaired by bending the tip back into shape, straightening out the kinks along the shaft, and cutting off any excess material if necessary. Most repairs require a fishing kit to complete, but some parts can be purchased separately.
The repair steps below assume that you have a fishing pole, reel, line, bobber, float, sinker and hook. If not, please go to the store or online and purchase these items.
Steps to repair a broken fishing rod
STEP 1 – Cut off the end of the rod. Cut just above where the rod starts to bend (it may be slightly longer than this). Make sure the cut is perpendicular to the axis of the rod. This will ensure that you don’t damage the grip. Remove the grip using pliers.
If the line broke near the tip, carefully use a hacksaw blade to saw it off. Remember to keep the hacksaw blade away from the eye of the rod and make sure the rod’s surface doesn’t get scratched.
Remove the entire handle. You should now only have the head attached to the rod.
STEP 2 – Bend the tip back into shape. Using pliers, gently bend the tapered portion of the rod back into shape. Be gentle while doing this – you don’t want to crush the tip of the rod. Repeat this step until the tip is perfectly round again.
Now take a small piece of wood and hammer it down onto the tip of the rod to flatten it out further. Don’t hit it hard enough to crack the tip. Now, you have to decide how much you want to fix the rod. If you plan on repairing the rod, then stop here. Otherwise, continue.
STEP 3 – Straighten out the shaft/handle. Take your fish pole and hold it vertically (like you would hold a cane). Place the head of the rod between two pieces of wood. Hammer down the middle of the pole firmly. Keep repeating this at different locations around the bottom of the rod until the shaft is straight.
After you have hammered down the first section of the rod, you can place the rest of the sections next to each other. Place them as far apart as possible, and start hammering. When you feel that you’ve reached the point where the rod is straight, then remove the wood. Continue hammering the pole until you reach the desired length.
STEP 4– Cut off excess material. There are many ways to do this. One method is to use a hacksaw or razor knife to trim up the remaining unneeded material. Another way is to use a Dremel tool. I prefer the latter option since you don’t have to worry about damaging the finish of the rod. Use the right setting on the Dremel to avoid gouging the surface of the rod.
STEP 5 – Sand the rod. Start sanding the inside of the rod. This ensures that the finished product looks nice and smooth. To achieve a perfect look, use a fine grade of sandpaper. After you’re done sanding, use a clean cloth to wipe over the pole.
STEP 6 – Finish the job. Apply a coat of clear nail polish to the whole rod. Allow the polish to dry completely before removing the nails. Once the polish dries, you’ll notice that the rod no longer has any markings. However, you should still apply a protective coating to the outside of the rod, otherwise it may yellow over time.
You can also paint the rod. While painting, remember to protect the rod with plastic wrap. Do not let the paint touch the rod directly. Wait for the paint to completely dry before getting rid of the plastic wrap.
A final note: Always store your fishing poles upright. Never leave your rod laying horizontally or it could become deformed.
Does a Fishing Rod Wear Out?
When fishing, do you ever wonder if your rod wears out? Or do you just keep using it until something happens? Well, I know what you’re thinking; I’m sure that your rod is going to break at some point. However, I have been enjoying my fishing rods for years now and they still work perfectly fine. So, I decided to write an article about whether or not a fishing rod does wear out.
I’ve fished since I was 10 years old, and I don’t remember having any issues with my first three-piece rod (which is still working great). After that, my dad bought me two five-piece rods (still works great) and then I got a six-piece rod.
These were all the rods that I had before I started high school, and these rods have all lasted over 20 years each. So, from those experiences I would say yes, it’s pretty hard to ruin a fishing rod.
Sure, sometimes the line goes bad, but that’s no big deal. And I guess, for me, it really doesn’t matter if I use a reel or not. As long as I have a good rod, I’ll be happy. Plus, whenever I want to fish, I always get to choose where to go! That’s true freedom.
When fishing rods get old they begin to lose their elasticity and flexibility. A rod becomes stiffer and less responsive especially if it’s not handled regularly. If left alone for long periods of time, the material at the tip of the fish line may become brittle, causing the fishline to break easily. Another thing that happens over time is the color fades away, making the rod appear dull.
In order to repair or replace damaged parts, you’ll need to have several tools at hand. You’ll need a small screwdriver (a good size works best), a wire cutter and pliers, a pair of scissors, and a hammer.
Before attempting any repairs, thoroughly clean the area where the damage occurred. After the damage is cleaned, apply some adhesive tape to hold down the rod while you work. Take care not to put too much pressure on the rod since you don’t want to bend it further and risk breaking it again.
Once you’ve repaired the rod, make sure to give it plenty of attention. Keep it out of direct sunlight and check often to ensure that it stays clean and dry. You should expect the rod to last for years if it’s treated properly, but you never know when something might happen to cause it to fail.
What is the Life Expectancy of a Fishing Rod?
A fishing rod’s expected life span varies depending on its type, but the best-quality rods should last at least ten years if treated properly. While some manufacturers claim that their rods have a lifetime warranty with no breaks after 30 days, others do not cover damage caused by improper use.
The best way to ensure longevity is to treat your rod well and to take care of it. Keep it dry and store it away from water, dirt, bugs, and other damaging elements. Clean the rod regularly using a good cleaning solution.
If you know what kind of action you want your rod to exhibit (i.e., cast consistently), then you may be able to extend its lifespan somewhat by choosing a specific grip size. When you hold a rod, the amount of leverage you exert over the line determines how much tension is put on each joint.
To obtain maximum flexibility, try holding the rod with about 60 percent of your body weight distributed evenly across both hands. On occasion, you may need to replace the reel seat, especially if you’ve been casting with your rod for a long time.
Most fishing rods are manufactured out of graphite or composite material, but you can buy bamboo, metal, aluminum, or wood handles. Composite materials are lighter than graphite and are often preferred in fly fishing applications. Bamboo is less commonly used in fly fishing.
While bamboo is resistant to cracking, it is susceptible to warping, so you’ll probably want to choose something else. Wood is heavier than composite materials and is great for fishing in cold weather. You can find wooden rods online from reputable manufacturers.
Fiberglass rods are generally lightweight and durable. They tend to be inexpensive, and they offer consistent performance. Because fiberglass rods are more flexible than graphite rods, they’re ideal for casting longer distances. But they aren’t recommended for trout fishing; they’re prone to bending under pressure.
Graphite rods are among the strongest, stiffest, and heaviest models available. Their high tensile strength makes them perfect for fly fishing. They’re also appropriate for spinning and baitcasting applications. They’re heavy enough to withstand the rigors of rough handling, although they can crack if dropped hard.
Aluminum rods are commonly used for bass fishing. These rods are strong and very durable, though they lack the stiffness of graphite or fiberglass. They are relatively inexpensive compared to graphite and composite rods.
Titanium rods are extremely light and allow for greater control over distance and accuracy. Even though titanium is expensive, it offers the greatest value for money.
Spinning rods are of carbon fiber, bimetallic wire, or monel steel. Carbon fiber rods are the most powerful, but are also extremely expensive. Monel steel rods are the cheapest, but they are weak and brittle. Bimetallic wire rods are somewhere in between carbon fiber and monel steel in terms of power.
Fly rods are to cast flies accurately, and they’re the only type of rod that’s carry visible accessories. Fly rods are either of graphite or bamboo, and they range in length from 25 inches to 50 inches.
There are three basic types of fly rods: standard, shorty, and ultra-lightweight. Standard rods are to handle most situations, while ultra-lightweights are to cast shorter distances. Shorties are the shortest rods available, and they’re typically in tandem with spools.
Rod cases are great for storing your favorite rod in style. Rod cases are available in many different styles, including leatherette and canvas, and they’re affordable.
A telescoping rod holder lets you easily transport your rod without having to attach it to any surface. Telescoping rod holders fold flat for storage and are available in plastic or nylon.
Reels are the device that actually catches fish. Some reels come with a removable drag knob or lever that you can adjust to suit your fishing preferences. Others are adjustable by way of a screw mechanism. Either way, you’ll want to make sure that the drag knob or lever adjusts smoothly and securely.
Fishing tackle boxes are convenient for organizing your gear. They’re available in a variety of shapes and sizes, and many come with a lid that snaps shut.
Lures are artificial baits, and they’re to attract fish. The shape, color, and texture of lures affect the likelihood of catching fish.
Things to Do With Old or Broken Fishing Rods
Make a Fish Finder (or a Fishing Pole)
This is a great way to keep kids interested in fishing. All you need is a long piece of PVC pipe and some old fish hooks. You’ll need to cut off the eye and barb of each hook. Then tape them onto the end of the pipe at the proper height for casting. Next, tie a knot in the middle of the line about 1 foot away from the point where you’ve hooked the rod.
Now, tie the ends together, forming a circle around the center knot. Use tape to secure the circle to the inside of the tube. Finally, use tape to close off the top of the fishing pole/rod.
Make a Paddle
Cut a piece of PVC piping to fit in between two pieces of wood. Add a handle to make it easier to hold. Now, add a blade to each side of the paddle. These blades should face outwards rather than inward towards the body of the paddle.
Make a Fish Hook Holder
You may need to buy a few plastic cups if you don’t have any old ones lying around. Drill holes into the bottom of each cup, then drill a hole in the lid of the plastic container. Screw both parts together. Now just stick the fishhooks inside.
Make a Hook-Tie Knot Tying Tool
This handy little tool is perfect for tying knots. Simply attach a small peg to the backside of a fishing hook, then screw the peg into the device. It’s to help prevent the hook from sliding out.
Create a Caddis Fly Swatter
If you don’t already own a caddis fly swatter, you’re missing out! This simple DIY project makes a great gift idea for anyone who loves fishing. To create one, take a strip of wire approximately 2 inches wide and attach it to a wooden dowel. Attach a couple of split rings to either end of the strip of wire, then push the rings down toward the end of the dowel.
Now, bend the end of the wire into a loop shape. Attach a piece of elastic to the loop. This piece of elastic attaches to your hand so that you can pull it down slowly while striking the fly above the surface of the water.
Make a Saltwater Fishing Net
Take apart an old net, then lay it flat on the ground. Fill the open spaces inside the net with rocks and sand. Tie an anchor knot at one end of the net, then tie the other end of the net to one of the anchors using a slipknot. Now, place the rest of the net over the rocks and fill it with water. Place a weight in the center of the net to ensure that it doesn’t flip upside down.
Build a Floating Fishing Line
To build a floating fishing line, simply wrap the rope around a tree branch. Once it’s all connected, tie it to the top of your boat or dock. Keep in mind that some ropes are thicker than others. If you want something stronger, simply use a thicker rope. But, remember to always test the strength of your line before attaching it to something heavy!
Will Walmart exchange a broken fishing rod?
The company does not offer returns on items under $75, and if a customer wants their product replaced instead of a refund, they would need to pay a fee to ship back the item to Walmart.
Walmart doesn’t sell anything directly to consumers. Instead, it sells products to distributors, who then sell them to retailers like Best Buy, Target, and Amazon
If you find yourself stuck with a defective or damaged product, however, you might want to take advantage of Walmart’s warranty policy. If you’re looking for a fishing rod that won’t break, we recommend the Suunto River Rod Pro Reel Combo.